Skip to main content
Version: 8.7.0

How do I set up the KDL-10?

This guide explains the initial setup of the KDL-10.

Prerequisites​

  • SiteManager as the main device
  • SmartPDU (KPMDU) or PowerManager (KPM)

Step-by-step guide​

  1. Start learning via SmartMonitoring -> Virtual Sensor
  2. Select KDL-10 as the device template
  3. The next steps are guided by instructions
    3.1 Switch the KDL-10 to initialization mode
    3.2 Exit initialization mode