MultiSensor LAN – DATASHEET

Legacy product
This product is no longer available. The documentation is still available as an archive.
Order-Codes:
FunctionMultiSensor for room monitoring
Integrated softwareKentixONE via integrated web server (HTTPS)
Operating modeStand-alone device (single operation)
Satellite Device (KentixONE network connection)
Sensor temperatureMeasuring range -20 to 99°C (accuracy ± 0.5°C)
Sensor – Relative humidityMeasuring range 0 to 100% (accuracy ±3%)
Dew pointCalculated in °C
Sensor – motion detectorPIR sensor, trigger sensitivity adjustable
Detection cone: approx. 110
Range: approx. 8m
Sensor – Vibration3-axis accelerometer with position detection (sensitivity adjustable), measuring range 0.25-5G
Sensor – Carbon monoxide (CO)0-1,000ppm measurement ± 10%
Sensor lifetime approx. 10 years
Signal generator85dB, 2.3kHz
KENTIX system socketRJ45 jack for connecting external expansion modules
Via IO adapters(KIO3) are available:
2x digital input (potential free)
2x relay output (changeover contact)
LEDALARM (red), RUN (green), LINK/ACT to LAN socket
Ethernet with PoE10/100Mbit (Default IP: 192.168.100.223)
Power supply via PoE Class 2, power consumption approx. 2W
RadioBLE 2.4GHz ISM band, encryption AES 128 bit
SD cardIntegrated Micro SD card holder as additional memory for image recording, up to 128 GB
ButtonReset button for factory reset on rear panel
HousingMaterial: PS 90 x 90 x 45 mm Weight approx. 100g
Colors: White, Black
Environmental conditionsTemperature 0 – 50°C
Humidity 5-95%, non-condensing
TypesKMS-LAN-B-BLE (BLE Wireless, Black Housing)
KMS-LAN-W-BLE (BLE Radio, White Housing)

KMS-LAN-B (Black housing) – previous model
KMS-LAN-W (Housing White) – Previous model
Scope of deliveryMounting bracket, mounting material, SlimLine cable 3m
AccessoriesIO adapter(KIO3)
Leakage sensor (KLS03)
PoE Injector (KPOE150S)
CertificationCE
Was this article helpful?

Related Articles