Skip to main content

Signal Profiles

Signal profiles allow configuration and management of combinations between events and signaling types. This determines how the siren behaves in specific alarm situations.

Overview​

The overview page displays all available signal profiles in a structured table.

Search Function​

Using the search field, you can specifically search for certain signal profiles. The search filters results in real-time based on the entered search term.

Signal Profiles Table​

The table shows all available profiles with the following information:

  • NAME: The name of the signal profile (e.g. "Standard")
  • Actions: Available actions for each profile (View, Edit, Delete)

The table defaults to showing "Showing 1 to 1 of 1" entries and allows selection of entries to display (25 per page).

info

New signal profiles can be added via the corresponding button.

Create Signal Profile​

A signal profile is a collection of signaling types linked to events.

General ​

Name​

Assign a unique name for the signal profile. This field is marked as required and must be filled out.

Devices​

Select the devices this profile should be assigned to. You can choose from available devices via the dropdown menu.

note

Please select the devices this profile should be assigned to.

Event Mapping ​

Configure combinations of events and signaling types. This determines how the siren behaves in specific alarm situations.

Map Event and Signal Type​

Event Select the event/state that triggers the alarm. The dropdown menu offers these options:

  • Off
  • State Change
  • All Alarms
  • Fire Alarms
  • Permanent Active Alarms
  • Manual
  • Tamper
  • Armed Active Alarms
  • Arming
  • Disarming
  • States
  • Signal Open Doors
  • Collective Alarm (Group)
  • Collective Fire Alarm (Group)
  • Collective Permanent Active (Group)
  • Collective Tamper (Group)
  • Collective Armed Active (Group)
  • Armed
  • Disarmed

Signal Type Select how the alarm should be displayed. Available options:

  • All off
  • 10 seconds red/green flashing & quiet buzzer
  • 10 seconds red/white flashing & fast/loud buzzer
  • 10 seconds pink/blue flashing & oscillating buzzer
  • Constant blue LED & buzzer off
  • Constant green LED & buzzer off

Add Button​

The green "Add" button adds the configured event-signal type combination to the profile.

note

Please select the signal types to be assigned to the profile.

Edit Priorities​

The "Edit Priorities" button allows management of event priorities.

tip

Manage event priorities - This function allows you to set the order and importance of different events.