Power supply

PoE (Power over Ethernet)

Default IP address

Subnet mask

User / Password

admin / password 

Reset to Factory Settings

Reset to factory settings

  1. Restart the device (disconnect power supply and reconnect it)

  2. As soon as the internal status LED is active (green), press the RESET button (1) on the back of the device.
  3. Press and hold the button for 15 seconds until an acoustic feedback (BEEP) is heard.
  4. The device is reset to factory settings and restarts.
  5. After approx. 60 seconds the MultiSensor can be reached again via the standard settings (3).

All settings will be lost!