Reports are used for the automated, periodic listing of parameters relevant to the user. You can choose between daily, weekly, monthly and annual intervals for the periodic creation of reports.
Depending on the selected interval, the parameter in the report can be broken down further in terms of time, with the lowest resolution being daily. Measured values from the MultiSensor Monitoring and Power Monitoring areas can be selected as parameters. Devices that are combined into a rack unit only provide the measured value of the rack unit if the parameter is selected as a group measured value.
You can also select whether the maximum, minimum, average or all individual measured values are to be output in the report over the split time interval of the parameter. The sum of the measured values is only useful for energy consumption and can also be selected for this parameter.
The report can either be sent to a user by e-mail or saved on the SD card in the main device. You can choose between a CSV file or a JSON file as the storage format.