1. Home
  2. SmartMonitoring
  3. Datasheets
  4. I/O module with 16 alarm inputs – DATASHEET
  1. Home
  2. Datasheets
  3. I/O module with 16 alarm inputs – DATASHEET

I/O module with 16 alarm inputs – DATASHEET

Order-Codes:
FunctionExpansion module for up to 16 external alarm or system messages. Communication is via Ethernet, so the module can be mounted anywhere. The configuration is done in the KentixONE software interface. The module offers easy IP configuration and testing of the inputs without additional software via the integrated web server.
Connection possibilityAlarmManager or SiteManager
ConfigurationIntegr. Web server (HTTP)
Default IP: 192.168.255.1 (Admin/Admin)
ProtocolsModbus communication via IP port: 502 (default)
SecurityID, password and IP filter
Connection terminalsPlug-in screw terminals for cables up to 1mm²
EnterängeDigital inputs for potential-free wiring
ON: Open
OFF: Input switched to GND
InsulationEthernet 1.5kVDC
InputsI/O 3.7kVrms
EnvironmentTemperature 0°C to +45°C
Rel. Humidity 10-90%
NetworkLAN 10/100 Base-TX
Power supplyPoE (Class 2) or external power supply 12-30VDC, 4.5Watt
Housing72 x 123 x 35 mm (DIN rail mounting)
Scope of deliveryKIO7053, 3m patch cable, power connection cable, manual
ApprovalCE
AccessoriesPower supply unit or PoE injector if no PoE supply is available.

Terminal assignment

Wiring (potential free)

Was this article helpful?

Related Articles