You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Current »

Art-Nr: KPMDU-RC-XXXXC13C19-1–16-H • Datasheet: SmartPDU-2HE

The Kentix SmartPDU-2HE is used to supply power to end devices in data or network cabinets while simultaneously monitoring power, recording consumption data and monitoring the environment. The SmartPDU-2HE is network-based and, like all Ethernet-capable Kentix devices, is equipped with a Kentix system socket for connecting further peripherals.

Basically, the structure of a Kentix SmartPDU is always the same, the differences are mainly in the power connection (10Amp or 16Amp) and the socket configuration (C13 or C19).
The SmartPDU-2HE is also available as a dual PDU, so that electronic end devices are protected against possible failures via two separate power supplies.

Due to its small size of only 9 cm (two height units), the SmartPDU is ideal for smaller server cabinets.
The Kentix SmartPDU-2HE can be supplied with or without a residual current meter (RCM).

The Kentix IP rack lever DoorLock-RA4 can be connected via the system port of the SmartPDU-2HE. In combination with the distribution box, up to two DoorLock-RA4s and two door contacts can be operated via one PDU. Configuration takes place via an AccessManager, which must be in the same network as the SmartPDU.
Further information on the intelligent locking system can be found here: DoorLock-RA4 (KXC-RA4)

Mounting example