You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Integration is possible with almost any network camera.

The image recording functionality is based on the fact that the AlarmManager or AccessManager retrieves single pictures (snapshots) from the camera.
For this purpose, the corresponding HTTP(S) command for the respective camera model must be stored in the configuration of the Kentix device.

The HTTP command can be found either in the camera's user manual or online.
Without the corresponding HTTP command, the camera cannot be used with Kentix devices.

The CGI command is different for all network camera manufacturers. 
The following table lists the most commonly used manufacturers including the required CGI commands.