Kentix DoorLock is generally compatible with the following manufacturers:

- Rittal
- EMKA
- Knürr

The following prerequisites must be fulfilled:

Rittal:
The cabinet must be equipped with a TS8 locking system.
A comfort handle of type 8611.070 / 8611.360 / 8611.340 must also be or will be
fitted to the cabinet.
You can also check existing cabinets
whether a profile half cylinder of the following type is installed in the cabinet: 9785.040 / 9785.042

EMKA:
The cabinet must be equipped with a swivel handle with variable locking insert (program 1325).
In addition, the following swivel handle must be available / installed on the cabinet: 1325-U1-01 (swivel handle with hook without cap)
You can also check existing cabinets
whether a profile half cylinder of the following type is installed in the cabinet: 3XB-120 / art. no. 1089-U1 / U2

Knürr:
The cabinet must be equipped with or prepared for a "door locking set" or "complete locking set" for Miracel cabinets (MIR20460 / MIR00069).

In the variants listed above, new cabinets can be equipped with Kentix DoorLock or the existing profile cylinders can simply be replaced.
For this purpose, profile half cylinders without spring return can be installed.
The length must be measured individually or taken from the data sheet belonging to the cabinet.