SmartPDU
SmartMeter
Parent Device
Select the parent device under which the new device should be integrated.
With multiple locations or separate networks, care must be taken to ensure that communication between the two devices is possible.
All PowerManagers and SiteManagers are available.
Alarm Group
The alarm group determines which logical or spatial unit the new device is integrated into. This determines, for example, the alarm and notification behavior of all subordinate devices.
The model selection sets specific communication settings such as register numbers. If none of the offered models apply, a custom SmartMeter can be added which has no preset configurations.
Address
Communication with the device is established via the address and optionally the network port. In most cases, IPv4 and DNS addresses can be used.
Finalize
Now click on Add and wait until the message Device successfully added is displayed.
The configuration mask of the newly added device can be opened directly via the link button.
Rack Unit
Parent Device
Select the parent device under which the new device should be integrated.
With multiple locations or separate networks, care must be taken to ensure that communication between the two devices is possible.
All PowerManagers and SiteManagers are available.
Alarm Group
The alarm group determines which logical or spatial unit the new device is integrated into. This determines, for example, the alarm and notification behavior of all subordinate devices.
Name
The name serves for unique identification of the device in KentixONE.
Since device names are used in the Detail View as well as in the log books, descriptive names are recommended. Good device identifiability greatly increases the clarity of the system.
Finalize
Now click on Add and wait until the message Device successfully added is displayed.
The configuration mask of the newly added device can be opened directly via the link button.