SmartVideo
Network Camera
Applies to all network cameras
Host
Wählen Sie den Host aus, unter dem das neue Gerät eingegliedert werden soll.
Bei mehreren Standorten oder getrennten Netzwerken muss darauf geachtet werden, dass eine Kommunikation zwischen den beiden Geräten möglich ist.
Available hosts are all KentixONE devices except MultiSensor (wireless).
Alarmgruppe
Die Alarmgruppe bestimmt, in welche logische oder räumliche Einheit das neue Gerät eingegliedert wird. Diese bestimmt bspw. das Alarm- und Benachrichtigungsverhalten aller untergeordeneten Geräte.
Adresse
Über die Adresse und opt. den Netzwerkport wird die Kommunikation mit dem Gerät hergestellt. In den meisten Fällen können IPv4- und DNS-Addressen verwendet werden.
Abschluss
Klicken Sie nun auf Hinzufügen und warten Sie, bis die Meldung Gerät erfolgreich hinzugefügt angezeigt wird.
Über den Link-Button kann direkt die Konfigurationsmaske des neu hinzugefügten Geräts geöffnet werden.
Initial Configuration
1. Choose Location
Specify where the network camera is mounted. This setting affects image pre-buffering:
- Indoor: Images are not pre-buffered (10 images are stored from booking).
- Outdoor: 3 images are pre-buffered, plus 7 images from booking.
This option helps adapt image recording to the respective environment.
2. Select Protocol
Choose the communication protocol that KentixONE uses to access the network camera. Typical protocols are e.g. HTTP or HTTPS.
3. Enter Address
Enter the IP address or hostname of the camera.
4. Select Camera Type
Select the appropriate camera type from the list of pre-configured models. This automatically sets default paths for the livestream URL and snapshot URL.
Alternatively, you can manually enter your own connection data if your camera is not included in the list.
5. Username and Password
Enter the camera's credentials to authenticate access. This data is necessary to retrieve live images and snapshots.
6. Livestream URL
Enter the path and parameters for retrieving the livestream.
7. Snapshot URL
Enter the path and parameters for retrieving individual images (snapshots).