1. Home
  2. SmartAccess
  3. Datasheets
  4. AccessManager for cable readers – DATA SHEET
  1. Home
  2. Datasheets
  3. AccessManager for cable readers – DATA SHEET

AccessManager for cable readers – DATA SHEET

Order-Codes:
Integrated softwareKentixONE via integrated web server (HTTPS)
OperationStand-alone or networked
Number of doors2 doors (up to 4 readers inside/outside)
NetworkingAny number of AccessManagers as main satellite
SD cardIntegrated Micro SD card holder up to 128 GB
Acoustic signal generator85dB, 2.3kHz
LEDALARM (red), RUN (green), LINK/ACT to LAN socket
ButtonReset button
Network (PoE)10/100 Mbit Ethernet port with PoE
Power supply (PoE)PoE class 3, power consumption in operation approx. 3W with splitter function max. 15W short term.
Integrated PoE splitterVoltage output 24VDC/500mA (max. 1A/250ms) for connection of reader and door opener
Connection electric strike/lock2x relay: 125VAC/60W, 60VDC/30W, 1A, changeover contact (NO/NC) switchable, connection cable thickness: 0.205 – 1.31 mm²
Digital inputs2x Digital inputs, each door configurable as:
– Alarm input (door open monitoring)
– Pushbutton input for door opening
RFID reader connection4-wire cable (cable: J-Y(ST)Y, 4x2x0.8), cable length up to 500m, up to four readers connectable or up to 16 rack levers (DoorLock-RA4) connectable (cable CAT5/6/7 AWG24)
Dimensions47 x 48 x 33 mm WxHxD
Environmental conditionsTemperature 0 to 60°C, humidity 5-95%, non-condensing
Protection classIP20
Mounting– On mounting rail / top-hat rail (35mm)
– In switch box 60mm
IP Ports– 443 TCP (HTTPS)
– 5222 TCP (KentixONE-GO)
– 161 UDP (SNMP-GET)
– 162 UDP (SNMP-TRAP)
Scope of deliveryAccessManager, mounting material, SlimLine cable 3m
AccessoriesPoE Injector (KPOE150S)
CertificationCE, FCC

Was this article helpful?

Related Articles