Factory defaults
Default IP-Adress | 192.168.255.1 |
Subnetz-Mask | 255.255.255.0 |
User | Admin |
Password | Admin |
The AlarmManager-PRO can be extended with up to 32 IO modules by additional inputs and outputs.
Three external modules are available for this purpose, the differences are shown in the following table:
KIO7052 | KIO7053 | KIO7017 | |
|---|---|---|---|
|
|
| |
| Digital inputs | 8 | 16 | - |
| Digital outputs | 8 | - | 4 |
| Analog inputs | - | - | 8 |
| Protocol | Modbus TCP | ||
| IP Port | 502 TCP | ||
| Network configuration | Web Server HTTP, Port 80 Default IP: 192.168.255.1 (Admin/Admin) | ||
| AlarmManager-PRO configuration | Configuration completely via AlarmManager-PRO Only IP settings on IO module necessary Alarm display logic freely adjustable | ||
| power supply | PoE Extern 12-30VDC | ||
| Assembly | DIN rail, stackable | ||
| Connection variant 1 | SINK
| ON Stage
Potential-free wiring | Voltage Input Differential
Default 0-10V |
| Connection variant 2 | SINK
| OFF Stage
Potential-free wiring | Voltage Input Single Ended
Default 0-10V |
| Connection variant 3 | SOURCE
| - | Current Input 4-20mA*
Move Jumpers! |
| Connection variant 4 | SOURCE
| - | - |
| Connection variant 5 | DIGITAL OUTPUT
| - | - |
| Connection variant 6 | DIGITAL OUTPUT
| - | - |
* To change from voltage measurement 0-10V (default) to current measurement 4-20mA, the jumper inside the module must be changed.
Commissioning and configuration
The modules can be supplied with power either via PoE or via an external power supply unit. When using a power supply unit, be sure to observe the information on the power supply in the data sheet. Information on the wiring of the inputs and outputs can also be found in the data sheet in the appendix.