Art-No: KMS-LAN-B, KMS-LAN-W  Datasheet: MultiSensor-LAN

In contrast to the MultiSensor-RF with radio interface, the MultiSensor-LAN can also be operated in stand-alone mode without AlarmManager. For configuration in stand-alone mode, a web server is integrated which you can use to configure and operate the device via the network using a web browser. Integration into network management systems is easily possible via the SNMP software interface.

MultiSensor-LAN Front

MultiSensor-LAN Back

MultiSensor-LAN Connections

Verbindung mit PC

Connect the LAN socket of the MultiSensor-LAN to a PoE-enabled switch using a LAN cable. Also establish a network connection between your PC and this switch.
 Set the IP address of your PC to e.g. "" and you can reach the LAN sensor via the web interface at the address