When changing or purchasing a new Kentix AlarmManager, existing Kentix MultiSensors can continue to be used without any problems.
Depending on the device, an update may be required.
New MultiSensors (after 02/2018) do not work on an old AlarmManager (before 02/2018).
An overview of the compatibility can be found in the following table
Generation 1 until 01/2018 Generation 2 from 02/2018 | AlarmManager Generation 1 | AlarmManager Generation 2 |
|---|---|---|
| MultiSensor RF Generation 1 | √ | √ |
| MultiSensor RF Generation 2 | √ | √ |
| MultiSensor LAN Generation 1 | √ | after update MultiSensor |
| MultiSensor LAN Generation 2 | - | √ |
| MultiSensor LAN-RF Generation 1 | √ | after update MultiSensor |
| MultiSensor LAN-RF Generation 2 | - | √ |
| KeyPad | √ | - |
| KeyPad-Touch | √ | √ |
| MultiSensor-Door V2 | √ | √ |
| MultiSensor-Door V1 | √ | - |
| MultiSensor-Rack-Mini | √ | - |
| Leakage sensor (KLS03) | √ | √ |
| Leakage sensor Rope (KLS03-Rope) | √ | √ |
| KIO1 | √ | √ |
| KIO2 | √ | √ |
| KIO3 | √ | √ |
Digital I/O Module | √ | √ |
| Alarm siren | √ | √ |