Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Sv translation

The assembly of the Kentix SmartXcan is done in a few steps. All the necessary tools for mounting on a wall are included.

Wall bracket

Technical drawing wall bracket SmartXcan 

Awesome Icon

Assembly and mounting

Technical drawing mounting bracket 

Awesome Icon

  1. The wall bracket is attached to the wall at a height of 110 cm

  2. The SmartXcan mounting bracket is attached to the wall bracket
  3. The Kentix SmartXcan is fixed on the mounting bracket
    Open: For disassembly, the tab must be pressed down with a screwdriver, pin, etc. Only then can the SmartXcan be removed upwards.
    Fix: To mount the SmartXcan on the mounting bracket, the device is placed on the appropriate tabs of the mounting bracket and fixed by pushing the SmartXcan downwards.


To place the SmartXcan in a free space the Kentix SmartXcan stand can be used.
The stand is 110 cm high. The SmartXcan mounted on it is inclined at 60°. This height and tilt allows both smaller people and larger ones to easily measure temperature and maintain the required measuring distance.

Technical drawing SmartXcan Stand 

Awesome Icon
 (subject to modifications!)

Image RemovedImage Added

Mounting instruction Stand

The shaft of the stand is attached to the base plate with three 4.5 X 70mm, Pozidriv PZ2 screws.

SmartXcan Stand