Versions Compared

Old Version 21

changes.mady.by.user Johannes Bühner

Saved on

compared with

New Version 22

changes.mady.by.user Johannes Bühner

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Sv translation
languagede


Panel

Art.-Nr.: KXC-RA1, KXC-RA2 • Datenblatt: DoorLock-RA (KXC-RA1/2)


Image Added

Das Funk Schrankschloss ist eine Schließlösung zur einfachen Ausstattung oder Umrüstung von IT-Racks oder Verteilerschränken.
Auch beim Schrankschloss ist wahlweise ein Online- oder Offline-Betrieb möglich. Im Online-Betrieb mit AccessPoint integriert sich auch das Schloss nahtlos in bestehende Smart Access-Lösungen.
Das Schloss wird mit verschiedenen Adaptern und Schließhebeln geliefert und ist somit an fast jedes IT Rack anpassbar.

Wie nehme ich ein neues Schrankschloss in Betrieb?

Table of Contents

Abmessungen Schrankschloss

Image Added



Sv translation
languageen


Panel

Art.-No.: KXC-RA1, KXC-RA2 • Datasheet: DoorLock-RA (KXC-RA1/2)


The radio cabinet lock is a locking solution for simple equipment or conversion of IT racks or distribution cabinets. 
Online or offline operation is also possible with the cabinet lock. In online operation with AccessPoint, the lock can also be seamlessly integrated into existing Smart Access solutions.
The lock is supplied with various adapters and locking levers and can therefore be adapted to almost any IT rack.

How do I setup a new cabinet lock?

Table of Contents

Dimensions cabinet Lock



The radio cabinet lock consists of the following components

  1. Fixing nut for the cabinet lock on the door
  2. Locking lever (various variants available, included in scope of delivery)
  3. lock washer
  4. Fixing nut for the closing lever
  5. operating lever
  6. fixing screw
  7. Manual wake-up button
  8. battery
  9. battery compartment


A special key is required to open the battery compartment and is available separately.

For the different cabinet types, the lock comes with 3 different locking levers. 

Here, after installation in the door and fixing the fitting to the door frame, it must be checked which of the variants fits best.

Commissioning

Step 1: Drilling
Holes are required in the door to fasten the cabinet lock as shown in the following drawing.

Note

Depending on the cabinet type, drilling at the door is not necessary. For cabinets where there is already an opening after removing the existing locking lever, additional covers are available to cover the opening.

Step 2: Determining the opening direction

The direction of rotation of the actuating lever is determined by the position of the small screw on the mounting thread.

Screw screwed in laterally. Opening by turning the operating lever to the left.

Screw screwed in from below. Opening by turning the operating lever to the right.


Step 3: Assembly

Push the cabinet lock through the hole in the door and fix it with the aid of the fixing nut and fixing screw.

Then fix the locking lever and the lock washer with the fixing nut.


Note

If necessary, the profiles must be underlaid before screwing in the fixing nut and fixing screw.

Wake up the online cabinet lock

In contrast to the other Smart Access devices, the cabinet lock must be woken up by a button from idle mode. This is necessary during initial setup as well as during normal operation.

To wake up, press the button until the LED lights up. Only then hold the RFID token in front of the reading content.

Battery Change

  1. Open the battery compartment of the cabinet lock with the battery replacement tool. For this purpose, press the tool into the opening below the cabinet lock until the battery compartment can be removed.
  2. Remove the used battery and insert the new battery, paying attention to the polarity.
  3. Push the battery compartment into position until it locks into place.