- \n
- Provision of the radio teach-in card (service key) to prepare radio components and subsequently teach them into KentixONE. The service key card contains a unique system key, this is noted on the system card and must be well secured.<\/li>\n\n\n\n
- Provision of additional cards for service purposes such as battery replacement and assembly\/disassembly. These are not needed in the same way for all products.<\/li>\n\n\n\n
- Tools for assembly and battery replacement<\/li>\n<\/ul>\n\n
With the Servicekey card, the wireless components such as knobs, door handles or wall readers are integrated into the wireless network and the communication is encrypted. Only one master card set is required per system or installation. We recommend using an extra set of master cards for each project. The supplied system card is only used for physical management of the printed system key and should be stored in a safe place. It is not required for operation, but is necessary to generate new system key cards in case of loss.<\/p>\n\n
The master card set is only required for Kentix wireless components<\/strong>, not for wired readers. It is only required once per installation\/customer.<\/p>\n\n
Assignment of the content depending on the product<\/h2>\n\n
Type<\/th> System card* Service key Battery replacement card Dismantling card RFID Battery change tool Assembly DoorLock-DC BASIC<\/strong> X<\/td> X<\/td> X<\/td> X<\/td> X<\/td> Bracket<\/td> –<\/td><\/tr> DoorLock-DC PRO<\/strong> X<\/td> X<\/td> –<\/td> –<\/td> X<\/td> Magnet<\/td> Allen key DoorLock-LE<\/strong> X<\/td> X<\/td> –<\/td> –<\/td> X<\/td> Allen key Allen key DoorLock-RA<\/strong> X<\/td> X<\/td> –<\/td> –<\/td> X<\/td> Slider<\/td> –<\/td><\/tr><\/tbody><\/table> *Without reading function, only imprint of the system key<\/figcaption><\/figure>\n\n Keep the system card<\/strong> with the system key imprinted on it in a safe place, ideally in a safe. The system card<\/strong> is necessary for reordering in case of loss or defect of a service card. In case of complete loss of the system card<\/strong> and service card, only a very costly recovery at the factory is possible!<\/p>\n\n
Optical and acoustic signaling of the cards on the device<\/h2>\n\n
Function<\/th> Signal (acoustic and visual) and explanations<\/th> Map<\/th><\/tr><\/thead> First booking after commissioning<\/td> long tone and orange LED<\/td> Service key<\/td><\/tr> Programming mode start<\/td> Long tone followed by a short<\/td> Service key<\/td><\/tr> Programming mode<\/td> LEDs flash green<\/td> Service key<\/td><\/tr> Programming mode end<\/td> Short tone followed by a long tone<\/td> Service key<\/td><\/tr> Key taught<\/td> 2 short tones, LEDs light up green<\/td> Key token<\/td><\/tr> Key authorized<\/td> LEDs light green<\/td> Key token<\/td><\/tr> Key not authorized<\/td> long low tone, LEDs light up red<\/td> Key token<\/td><\/tr> Emergency access<\/td> no sounds, only the green LED flashes<\/td> Key token<\/td><\/tr> Battery warning phase 1<\/td> 5 short tones, simultaneously LEDs flash 5x red<\/td> Key token<\/td><\/tr> Battery warning phase 2<\/td> 5 short tones, at the same time LEDs flash 5x red, then 5s delay of engagement, at the same time LEDs flash green<\/td> Key token<\/td><\/tr> Battery warning phase 3 <\/td> 5 short beeps, simultaneously LEDs flash 5x red, no engagement, but battery change position<\/td> Key token<\/td><\/tr> Coupling error<\/td> 5 long tones, 2 short tones. Key token<\/td><\/tr><\/tbody><\/table> Table optical and acoustic signaling<\/figcaption><\/figure>\n\n Initial commissioning of the SmartAccess radio components<\/h2>\n\n
The setup described here shows how the initial commissioning of the individual components with the master card set is carried out. The components are then prepared for programming into the wireless network and installation in the door.<\/p>\n\n
DoorLock-DC BASIC<\/h3>\n\n
![\"\"](\"https:\/\/docs.kentix.com\/wp-content\/uploads\/2023\/01\/KXC-KN-1_1920x1920.png\")
<\/figure>\n\nPrepare device<\/strong><\/h4>\n\n
- Pull off knob cover<\/li>
- Pull out contact lock from battery compartment to activate battery<\/li><\/ol>