{"id":4150,"date":"2023-02-14T14:36:44","date_gmt":"2023-02-14T13:36:44","guid":{"rendered":"https:\/\/docs2.kentix.com\/knowledge-base\/multisensor-lan-ethernet-operating-instructions\/"},"modified":"2026-01-16T08:29:27","modified_gmt":"2026-01-16T07:29:27","slug":"multisensor-lan-ethernet-operating-instructions","status":"publish","type":"ht_kb","link":"https:\/\/docs.kentix.com\/en\/knowledge-base\/multisensor-lan-ethernet-operating-instructions\/","title":{"rendered":"MultiSensor-LAN (Ethernet) – MANUAL"},"content":{"rendered":"\n
DATA SHEET MULTISENSOR-LAN<\/a><\/pre>\n\n
KentixONE Operating mode<\/h2>\n\n
SiteManager Operation<\/th>Stand-alone operation<\/th><\/tr><\/thead>
<\/i><\/td><\/i><\/td><\/tr><\/tbody><\/table>
Further information on the operating mode<\/a><\/figcaption><\/figure>\n\n
Overview<\/h2>\n\n
The MultiSensor-LAN integrates a large number of individual sensors in one compact device and monitors their measured values. The MultiSensor-LAN is optimized for monitoring closed rooms and is typically mounted on or near the ceiling. The MultiSensor-LAN is network-compatible and is supplied with power via Power over Ethernet (PoE).<\/p>\n\n
The MultiSensor-LAN can be operated as a stand-alone device (operating mode: Stand-Alone Device) or in a network (operating mode: Satellite Device) with other MultiSensor-LAN and other Kentix devices. The KentixONE software is already integrated via the integrated web server (HTTPS). Configuration is carried out via a web browser and, depending on the operating mode, locally on the MultiSensor-LAN itself (operating mode: Stand-Alone Device) or on a central instance such as the SiteManager or AlarmManager (operating mode: Satellite Device).<\/p>\n\n
In addition to the Ethernet network interface, the MultiSensor-LAN has a BLE radio interface (2.4 GHz). Additional Kentix wireless sensors can be connected via these in the Satellite Device operating mode. The MultiSensor-LAN then also works as an Ethernet wireless gateway, making it very easy to set up stable sensor networks. The wireless sensors can be distributed within a radius of up to 20m, depending on the structure of the building.<\/p>\n\n
Safety instructions<\/h2>\n\n
Installation<\/span><\/div>
Installation and commissioning may only be carried out by trained specialist personnel in accordance with the instructions.
No modifications of any kind, other than those described in an appropriate manual, are permitted to Kentix GmbH products.
Certain levels of protection must be provided when installing Kentix equipment.
Observe the relevant regulations for installations in the respective environment.
Only operate the products within the defined temperature range.
The instructions should be passed on to the user by the person carrying out the installation.
Kentix accepts no liability for damage to the equipment or components resulting from incorrect installation. No liability is accepted for incorrectly programmed units.
Kentix shall not be liable in the event of malfunctions, damage to property or other damage.
<\/div><\/div><\/div>
Use of the products, transport and storage<\/span><\/div>
Protect the device during transport, storage and operation from
Protect moisture, dirt and damage.<\/div><\/div><\/div>
Battery powered products<\/span><\/div>
Do not use products in potentially explosive atmospheres.
Only operate the products within the defined temperature range.
Installation and battery replacement may only be carried out by trained personnel in accordance with the instructions.
Do not charge, short circuit, open or heat batteries.
When inserting the batteries, pay attention to the correct polarity.
The devices must always be operated with the batteries intended for the product.
When changing batteries, always replace all batteries.
Dispose of old or used batteries properly.
Keep batteries out of the reach of children.  
<\/div><\/div><\/div>
Maintenance
<\/span><\/div>
Kentix devices must be checked for functionality as part of annual maintenance.<\/div><\/div><\/div>
Disposal<\/span><\/div>
Electrical appliances and batteries must be disposed of separately from household waste.
<\/div><\/div><\/div><\/div>\n\n
Controls<\/h2>\n\n
Front<\/h3>\n\n
\"\"<\/figure>\n\n
  1. Status LED : 
    GREEN: <\/strong>POWER OK, no alarms pending
     RED: <\/strong>POWER OK, alarms pending<\/li>
  2. 360\u00b0 PIR motion sensor<\/li><\/ol>